Existing User

If you already have an AGI Web account, enter it here.



Forgot your password?

Sign-In
Guest
Create a new account. (All fields are required)


Used to sign in to your account

Select country for available organizations and states/provinces





close

STK/Aircraft Mission Modeler (STK/AMM)

STK/Aircraft Mission Modeler (STK/AMM) STK/Aircraft Mission Modeler The Aircraft Mission Modeler propagator for the aircraft object is a premier tool for performing complex, highly accurate, time-based mission analysis for aircraft operations. Aircraft Mission Modeler features a rapid mission modeling tool that allows users to model specific mission requirements quickly and easily using either the step-by-step GUI interface or the 3-D object editor. Utilizing aircraft specific characteristics, Aircraft Mission Modeler produces realistic flight paths based upon empirical, airframe-specific deterministic models. In addition to the default aircraft models included with the install, users can customize and add models as necessary to fulfill their needs.

  • Highlights

    • Leverages all STK functionality
    • Visualization with STK Professional Edition
    • Specify waypoints from catalog
    • Route procedures at each waypoint
    • 3-D route editing
    • Create custom aircraft
    • V/TOL and S/TOL modeling
    • Model aircraft banking around turns

  • Key Features

  • STK/Aircraft Mission Modeler

    Flight procedures

    At a specified waypoint AMM users have the ability to specify a flight procedure from a set of flexible, pre-defined options. The options include circular, figure-8, and racetrack holding patterns in addition to enroute, arc and basic point-to-point turns.

    3-D route editing

    In addition to building routes within the STK/AMM GUI, STK Professional users can add, move, and alter waypoints within the 3-D environment. The entire mission including waypoints and procedures can be clicked out in a matter of seconds. Holding pattern parameters such as length and width can be edited by simply clicking and dragging the 3-D control points.

    Catalog

    STK/AMM uses a catalog for managing necessary data such as aircraft models, waypoints, and runways. Combined with 3D route editing, the user can select runways from the catalog adding a mission takeoff or landing procedure on the runway. Additionally, depending on the extent of the catalog data, the procedure for the runway will start at one end and align with the direction of the runway.

    Banking on turns

    In addition to modeling smooth turns for waypoint procedures, STK/AMM computes aircraft banking around turns accounting for specified airframe characteristics. As part of the aircraft model, users can specify aircraft banking in terms of turn g, bank angle and turn acceleration. Modeling the aircraft banking within STK enables users to account for geometry considerations to such things as platform sensors, detection, and communications.

    Dynamic waypoints

    When planning a route users can specify other dynamic objects as waypoints. This capability enables aircraft-carrier takeoffs and landings, aerial refueling, and vehicle tracking. An entire mission can be planned relative to another vehicle.

X
AGI Support

Hours

  • Monday - Thursday: 6 a.m. - 10 p.m. ET
  • Friday: 6 a.m. - 8 p.m. ET

Phone

  • 1.800.924.7244
  • 1.610.981.8888

E-mail

X
Try AGI's Public ADF Server
  1. Obtain temporary permission to write to AGI's ADF server by requesting a guest account.
  2. Step by Step ADF Tutorial

X
See the ADF Administrators Guide for specific information about configuring an ADF Server.

Follow instructions below to request a 90 day evaluation license and the ADF Server Installation download link.

AGI Data Federate requires the use of a FlexNET License Server to host your license.

Obtain the Host ID and the Hostname or IP Address:

  • Start All Programs/Accessories/Command Prompt. Right-click to 'Run as administrator'.
  • At the prompt, enter ipconfig /all
  • Under Ethernet adapter Local Area Connection, note:
    • Physical Address (Host id)
    • IPv4 Address (IP Address)
  • Send this to AGI Support (moc.iga@troppus), with the subject line "Request for ADF Licenses."

You will receive an e-mail containing

  1. ADF Server Installation download link
  2. Detailed instructions for installing the License Server.
  3. Users are provided two *.lic files; a server license file installed on the FlexNET License Server and a client license, installed during the AGI Data Federate Server installation.
X

Supported OS and Hardware Requirements

Supported Operating Systems
  • Windows
  • XP Professional
  • Server 2003, 2008
  • Vista
  • Windows 7
  • Linux (TBA)
Minimum Hardware Requirements
  • 1.4 GHz Core Duo Processor
  • 2 GB RAM, 1 GB Disk Space for Installation
  • Dedicated Storage for Data, based on your needs
X
Why do I need to create an account and/or login?

AGI offers valuable online resources to registered Web visitors, such as software and data downloads, webinars and training materials, and product and event information. To access these key sections of our site, users must login. Remember, you only have to sign-up once and after that, you just need to login each time you visit.

Note: The following information is required for export control purposes only. AGI is committed to protecting your privacy, and as such, does not sell, trade or rent your personal information to third parties.